Do you have a disposable vape that needs a recharge or do not know how to recharge a Disposable Vape? The disposable vape comes pre-charged and pre-filled with various flavors of vape juice. So, is it possible to recharge it?
No charger is presently available in the market that you can use right out of the box for recharging disposable vape pens since the disposable vape pens do not have a charging system integrated into them. Suppose you are interested in charging a disposable vape battery with a charger. In that case, there are several hacks that you can make using scissors and a sharp knife.
How to Recharge a Disposable Vape?
Because disposable vape does not come with integrated charging systems, there are currently no chargers in the market that will allow for immediate recharging.
With scissors and a sharp knife, you can make several hacks for charging disposable vape batteries with a charger. Further, we will let you know the article’s DIY hacks of recharging a disposable vape.
Does Your Disposable Vape Charge?
There is no denying the popularity of disposable vape pens, especially given their convenience. It can continue to work for several days without recharging a disposable vape pen.
However, as the name implies, disposable vape pens aren’t intended for long-term use. You only have a few hits left before the battery runs out when the LED at the bottom of the vape starts blinking.
It should be thrown away and replaced at this point, as it has become useless. Unfortunately, most disposable vape pens still have a decent amount of e-liquid left in their tanks when their batteries die.
Thus, when a disposable vape pen battery runs out, it will still release large vapor clouds. If you still have e-liquid in the tank, throwing out a disposable vape pen is a waste. The disposable vape pens do not feature a charging port or do not give the option to recharge.
You may think that all hope is lost once your disposable vape pen’s LED blinks. However, there’s no need to rush back to your local vape shop. Imagine that you are willing to connect with your inner electrician.
In that case, you can recharge the battery to use the leftover e-liquid in the disposable vape so that you can continue vaping. In addition, we’ll provide a detailed overview of every step in this process of recharging disposable vape.
Steps for Making a DIY Disposable Vape Charger
There is no charger available in the market that will work for charging a disposable vape out-of-the-box because disposable vape pens do not include a charging port.
However, using a pair of scissors and a sharp knife makes it possible to convert almost any charger into one capable of charging a disposable vape.
- It would help if you first acquired a low-voltage charger, such as one with a micro-USB adapter.
- You can also use USB-C chargers and lightning cable chargers, although the latter will make the process more complicated.
- It is best to use either a phone charger or a charger with a micro-USB adapter. You can use any charger designed for small devices.
- It’s best to err on the side of safety if you’re trying to build a DIY charger using cables used to charge laptops.
- Remember that the process is irreversible, so whatever charger you use will be useless to you in the future.
- If you already own a charger that works with your phone, you can cut off the end just below where the adapter plugs in.
- The red and black wires should appear once you do this.
- Using a lightning cable charger, you will notice four wires: red, black, white, and green.
- There is no need to worry about the green and white wires.
- Remove about two inches of insulation from the snipped end of the charger using a knife.
- Then, cut the insulation off the red and black wires to see the copper wiring underneath.
You have now created a DIY charger that can recharge a disposable vape battery.
What Should You Do Before Recharging a Disposable Vape?
You will need to access your disposable vape pen’s battery after creating your DIY charger. To topple the LED cap, topple the lid at the bottom of the vape with pliers.
After removing the cap, you can also remove the whole vape assembly from the outer casing; this includes the LED, the battery, and the vape’s tank.
By this time, you’ll know just how much e-liquid remains in the tank and if it’s worth proceeding. There should, however, usually be enough leftovers in most cases.
Wires will connect all the vaper’s inner components, including the battery, tank, and LED. Because the wires connecting these components are far from strong, you should handle the inner assembly with care.
It is impossible to use the vaporizer again if any wires become disconnected; you need to reconnect it with a soldering iron. There would probably be no point in continuing if you have reached that point.
The wiring on the assembly should stay intact if you handle it gently so that you can charge the battery afterward. You will need to identify the positive and negative terminals of the battery in your disposable vape once you have located it in the inner assembly.
It is easy with some models, such as Fume vapes, which mark the red and black terminals of the battery for you.
Plug your DIY charger into the wall once you’ve identified your battery’s positive and negative terminals, then connect the black and red wires to the positive and negative terminals, respectively.
Conclusion
There are currently no chargers for a disposable vape that allow immediate recharging as they do not include integrated charging systems.
There are several ways to charge disposable vape batteries with a charger using scissors and a sharp knife. You can use the method we described to recharge your disposable vape. If you have any questions regarding it, you can ask via comments.